ELECTROMAGNETIC CHUCK CONTROL

Made specifically for Electromagnetic chucks and lifting magnets
$ 950
00
Starting at
  • 100% VARIABLE POWER
  • FULL DEMAGNETIZATION CYCLE
  • WORKS WITH ANY BRAND & SIZE
  • CONTROL MULTIPLE CHUCKS
  • PLC INTERGRATION
  • U.S INVENTORY & SERVICE
Popular

ELECTRO-PERMANENT CONTROL UNIT

Designed and programed for electro-permanent chucks
$ 990
00
Starting at
  • INPUT UP TO 10 PROGRAMS
  • PLC READY
  • U.S CUSTOMER SERVICE
  • ZONE PROGRAMING AVAILABLE
  • REMOTE PROGRAMING
  • DETAILED DIAGNOSTICS
NEW

Braillon Master control units and rectifiers are the result of many years of research and industrial magnetic experience.

Now take full advantage of electro-permanent and electromagnetic chucks with our reliable MC20 control units.

Master Control unit for magnet

 The following points describe the advantage of our control units:

1. OPERATE DIFFERENT DESIGNS AND BRANDS

BRAILLON MAGNETICS control units incorporate a microprocessor capable of saving several programs. This enables the operation of magnetic chucks & lifting magnets of different designs or manufacturers: available for both electro-permanent systems and electromagnetic systems.

2. TOTAL DEMAGNETIZATION

Demagnetization cycles are optimized for each type of magnetic chuck. Total Demagnetization is an option for all electromagnets and some electro-permanent chucks.  It is also possible to customize them on request using a USB key. Up to 10 different programs can be saved to the control unit or rectifier. Use our T20 Remote control with integrated screen to easily navigate all saved programs.

3. MACHINE INTERFACE 

All BRAILLON MAGNETICS control units integrate an interface allowing them to command and control the magnetic chucks from the PLC machine. Output security data is available to check the correct operation of the magnetic chuck. 

4. OFFSITE REMOTE ASSITANCE

The new MC 20 control unit allows our technicians to make a remote diagnosis in the event of a possible malfunction or in order to improve the configuration of the control unit. Example: improvement of demagnetization according to customer parts.

5. ADJUSTABLE SETTINGS BY USB KEY

The USB key integrated on the MC 20 board not only allows you to configure the control unit, but also to save all the information (history and errors). The key can also be used to modify the parameters in order to improve the functions of a magnet: the magnetism, the residual magnetism, the demagnetization time as well as the functions of the control unit.

6. CONTROL UP TO 8 MAGNETIC CHUCKS

The MC20 control units allow you to control up to 8 electro-permanent magnetic chucks at the same time. 

ELECTROMAGNETIC CONTROL UNITS with enclosure

Model Quotation Description Wattage Input (Vac) Output (Vdc) Transformer (included) Wiring AWG/MM2 Enclosure Size inch/mm
Electromagnet Control Unit 340 Watt
230 Vac
110 Vdc
None
16AWG / 3G1,5 mm2
12"x8"x9" / 300x200x210mm
Electromagnet Control Unit 340 Watt
400/480 Vac
110 Vdc
5 Amp
16AWG / 3G1,5 mm2
20"x16"x9" / 500x400x210mm
Electromagnet Control Unit 550 Watt
400/480 Vac
110 Vdc
5 Amp
16AWG / 3G1,5 mm2
20"x16"x9" / 500x400x210mm
Electromagnet Control Unit 1100 Watt
400/480 Vac
110Vdc
10 Amp
14AWG / 3G2,5 mm2
20"x16"x9" / 500x400x210mm
Electromagnet Control Unit 1100 Watt
400/480 Vac
220 Vdc
5 Amp
14AWG / 3G2,5 mm2
20"x16"x9" / 500x400x210mm
Electromagnet Control Unit 2200 Watt
400/480 Vac
220 Vdc
10 Amp
14AWG / 3G2,5 mm2
20"x16"x9" / 500x400x210mm
Electromagnet Control Unit 3000 Watt
400/480 Vac
110 Vdc
30 Amp
12AWG / 3G4 mm2
20"x16"x9" / 500x400x210mm
Electromagnet Control Unit 6600 Watt
400/480 Vac
220 Vdc
30 Amp
12AWG / 3G4 mm2
20"x16"x9" / 500x400x210mm

DO YOU HAVE AN ELECTRO-PERMANENT MAGNET?
JUST COMPLETE THE EASY FORM Bellow