control units for magnetic chucks - 2 great Options
ELECTROMAGNETIC CHUCK CONTROLS
Made specifically for Electromagnetic chucks and lifting magnets- 100% VARIABLE POWER
- FULL DEMAGNETIZATION CYCLE
- WORKS WITH ANY BRAND & SIZE
- CONTROL MULTIPLE CHUCKS
- PLC INTERGRATION
- U.S INVENTORY & SERVICE
ELECTRO-PERMANENT CONTROL UNIT
Mag chuck controller designed and programed for electro-permanent magnets- INPUT UP TO 10 PROGRAMS
- PLC READY
- U.S CUSTOMER SERVICE
- ZONE PROGRAMING AVAILABLE
- REMOTE PROGRAMING
- DETAILED DIAGNOSTICS
Can your control unit and remote control do this?
VARIABLE FORCE
Variable force is nothing new, potentiometers have always been the norm on a surface grinder. Now get repeatable force selection.
Zone Selection
If you have many chucks on your machine table, maybe you would like to have a zone setup. Divide your zones, up to 4 zones.
Machine Safety
A machine safety threshold can be setup. Example: Machine Spindle only starts when the minimum magnetic threshold is met.
saved Programs
Save up to 10 different programs. We know that sometimes it is helpful to have preprogramed forces for simple repeatability of parts
before purchasing an magnetic chuck rectifier
- DID YOU CHECK THE RESITANCE OF THE MAGNET?
- DID YOU CHECK THE ELECTRICAL INSULATION OF THE MAGNET?
- DID YOU CHECK IF YOU HAVE AN ELECTROMAGNETIC OR ELECTRO-PERMANENT MAGNET?
Braillon Master control units and rectifiers are the result of many years of research and industrial magnetic systems experience.
Now take full advantage of the electro-permanent and electromagnetic chuck control with our reliable MC20 control units.
The following points describe the advantage of our magnetic chuck rectifier and control unit:
1. OPERATE DIFFERENT DESIGNS AND BRANDS
A Braillon Magnetic chuck control unit has a microprocessor capable of saving several programs. This enables a better operation of magnetic chucks & lifting magnets of different designs or manufacturers. They are available in both electro-permanent control unit systems and electromagnetic systems.
2. TOTAL DEMAGNETIZATION
Demagnetization cycles are optimized for each type of magnetic chuck. Total Demagnetization is an option for all electromagnets and some electro-permanent chucks. An electro-permanent magnet can have a full demag cycle if it is made with Alnico magnets. It is also possible to customize the programs on request using a USB key. Up to 10 different programs can be saved to the control unit or rectifier. Use our T20 Remote control with integrated screen to easily navigate all saved programs.
3. MACHINE INTERFACE
All BRAILLON MAGNETICS control units integrate an interface allowing them to command and control the magnetic chucks from the PLC. Output security data is available to check the correct operation of the magnetic chuck. Is the door to your machine still open? Is the magnet off, should your really start machining? These are a few safety features that you can now control.
4. OFFSITE REMOTE ASSITANCE
The new MC 20 control unit allows our technicians to make a remote diagnosis in the event of a possible malfunction or in order to improve the configuration of the magnetic chuck control unit. Examples:1. Improvement of demagnetization depending on the customer parts. 2. Is there a problem with your voltage? 3. Keeps an eye on your frequency and much much more.
5. ADJUSTABLE SETTINGS BY USB KEY
The USB key integrated on the MC 20 board not only allows you to configure the control unit, but also to save all the information (history and errors). The key can also be used to modify the parameters in order to improve the functions of a magnet: the magnetism, the residual magnetism, the demagnetization time as well as the functions of the control unit.
6. CONTROL UP TO 8 MAGNETIC CHUCKS
The MC20 control units allow you to control up to 8 electro-permanent magnetic chucks or electromagnetic chucks at the same time. You will find our magnetic chuck rectifiers and control units any machine shops throughout the world. May it be a small or large surface grinder, plate milling machines, rotary grinders, bellow the hook magnets, they all need a way to be controlled. Let Braillon help you pick the right one for your needs.