Electromagnetic chuck controller, 550W, variable force

5/5

Magnetic chuck control unit, up to 550Watt.

Adjustable Variable Force. Full demagnetization cycle.

480Vac. For 110Vdc electromagnetic chuck.

$4,570.00

SKU iBUET550W-110Vdc-480Vac Category Tags ,

Description

COMPATIBLE WITH ALL ELECTROMAGNETIC CHUCK BRANDS UP TO 550 Watt

Upgrade any brand of electromagnetic chuck with this 550watt control unit. 480Vac, 110Vdc. US based support is always available out of our Chicago office. If you have any questions, just call us at 1- (312-912-1355). If you have different power requirements or are unsure which controller you need, see our full selection of control units.

GALVANIC ISOLATION TRANSFORMER INCLUDED (5A)

Galvanic Isolation Transformer for mag chuck controller

  • Galvanic Isolation . This means the controller is isolated from the client’s electrical network.

 

  • Independent of the client’s neutral systems (no matter the client’s electrical distribution)

 

  • Prevents pollution/rejection (for the purist, this is called “Harmonics”) The goal: To reject the pollution /line noise created by surrounding machines (with a lot of electronics, as is the case today) which can interfere with the proper functioning of our 550watt electromagnetic chuck control unit. It also in turn allows us to not pollute the customer’s network. Many machine tools are powered with a transformer for this reason.

INTERGRATED FINE VARIABLE POWER CONTROL

T20 REMOTE CONTROL FORCE VARIATION

A heavy duty Remote control Type T20 with digital screen readout allows for 0 to 100% variable force of your electromagnetic chuck. Also allows you to save multiple programs if needed.

ZONE SELECTION

Zone selector remote screen

Do you have multiple magnets to control? So you need to control them separately? This Zone selection through the T20 Remote control will do just that.

FULL DEMAGNETIZATION CYCLE

Braillon Magnetics has been at  it since 1921. We have worked years to come up with the best demagnetization cycle on the market. It is fast and very effective. The demagnetization cycle will remove the magnetism from the part to allow for easy removal of you part from the workholding magnet and leave you with low to no residual magnetism.

MACHINE SAFETY INTERFACE

You will have access to a 24v machine safety interlock. If you wish to have PLC integration, please call us, let us know so that we prepare the correct control unit properly.

OFFSITE REMOTE ASSISTANCE

Information screen from T20 remote control

Our new MC 20 control board allows our technicians to make a remote diagnosis and improve the configuration of the magnetic chuck control, if needed. All this is done through a simple USB key.